Specifications
| Flow Range | 400 – 900 gpm | 1,510 – 3,410 lpm |
| Revolutions per Volume | 0.166 rev/gal | 0.044 rev/l |
| Speed Range | 66 – 150 rpm | |
| Max. Differential Pressure | 1,330 psi | 9,150 kPa |
| Torque @ Max. Diff. Pressure | 22,020 lb-ft | 29,860 Nm |
| Stall Torque | 33,030 lb-ft | 44,780 Nm |
Predicted Build Rate – Degrees/100 ft (30 M)
Predicted Build Rate - Degrees/100 ft (30 M)
| Bend Setting | Slick Hole Size | Single Stabilizer Hole Size | ||||
| 9.875″ | 10.625″ | 12.25″ | 9.875″ | 10.625″ | 12.25″ | |
| 251 mm | 270 mm | 311 mm | 251 mm | 270 mm | 311 mm | |
| 0.39 | – | – | – | 2.7 | 0.8 | – |
| 0.78 | 2.0 | 0.7 | – | 4.8 | 2.8 | – |
| 1.15 | 3.9 | 2.6 | – | 6.8 | 4.8 | 0.5 |
| 1.5 | 5.8 | 4.5 | 1.7 | 8.6 | 6.7 | 2.4 |
| 1.83 | 7.5 | 6.3 | 3.4 | 10.4 | 8.4 | 4.1 |
| 2.12 | 9.1 | 7.8 | 5.0 | 11.9 | 9.9 | 5.7 |
| 2.38 | 10.5 | 9.2 | 6.4 | 13.3 | 11.3 | 7.1 |
| 2.6 | 11.6 | 10.3 | 7.5 | 14.5 | 12.5 | 8.2 |
| 2.77 | 12.5 | 11.2 | 8.4 | 15.4 | 13.4 | 9.1 |
| 2.9 | 13.2 | 11.9 | 9.1 | 16.1 | 14.1 | 9.8 |
| 2.97 | 13.6 | 12.3 | 9.5 | 16.4 | 14.5 | 10.2 |
| 3.00 | 13.8 | 12.5 | 9.7 | 16.6 | 14.6 | 10.4 |
We Offer The Following Drilling Motors
MOTOR SIZES
500 G9
500 6/7 Lobes 8 Stages
5″ 7/8 Lobes 3.8 Stages
650 G9
6.5″ 5/6 Lobes 8.2 Stages
6.5″ 7/8 Lobes 5.7 Stages
675 G9
6.75″ 5/6 Lobes 8.2 Stages
6.75″ 7/8 Lobes 5.7 Stages
800 G9
8″ 7/8 Lobes 5.9 Stages