Specifications
| Flow Range | 450-750 gpm |
| Revolutions per Volume | 0.40 rev/gal |
| Speed Range | 178-298 rpm |
| Max. Differential Pressure | 1,760 psi |
| Torque @ Max. Diff. Pressure | 11,090 lb-ft |
| Stall Torque | 16,630 lb-ft |
Predicted Build Rate – Degrees/100 ft (30 M)
Predicted Build Rate - Degrees/100 ft (30 M)
| Bend Setting | Slick Hole Size | Single Stabilizer Hole Size | ||||
| 7.875″ | 8.5″ | 8.75″ | 7.875″ | 8.5″ | 8.75″ | |
| 200 mm | 216 mm | 222 mm | 200 mm | 216 mm | 222 mm | |
| 0.39 | 0.8 | – | – | 4.6 | 2.6 | 1.7 |
| 0.78 | 3.2 | 1.9 | 1.3 | 7.0 | 4.9 | 4.1 |
| 1.15 | 5.4 | 4.1 | 3.6 | 9.2 | 7.2 | 6.3 |
| 1.5 | 7.5 | 6.2 | 5.7 | 11.3 | 9.3 | 8.5 |
| 1.83 | 9.5 | .2 | 7.7 | 13.3 | 11.3 | 10.5 |
| 2.12 | 11.3 | 10.0 | 9.5 | 15.1 | 13.0 | 12.2 |
| 2.38 | 12.9 | 11.6 | 11.0 | 16.7 | 14.6 | 13.8 |
| 2.6 | 14.2 | 12.9 | 12.4 | 18.0 | 15.9 | 15.1 |
| 2.77 | 15.2 | 13.9 | 13.4 | 19.0 | 17.0 | 16.2 |
| 2.9 | 16.0 | 14.7 | 14.2 | 19.8 | 17.8 | 16.9 |
| 2.97 | 16. | 15.1 | 14.6 | 20.2 | 18.2 | 17.4 |
| 3.00 | 16.6 | 15.3 | 14.8 | 20.4 | 18.4 | 17.6 |
We Offer The Following Drilling Motors
MOTOR SIZES
500 G9
500 6/7 Lobes 8 Stages
5″ 7/8 Lobes 3.8 Stages
650 G9
6.5″ 5/6 Lobes 8.2 Stages
6.5″ 7/8 Lobes 5.7 Stages
675 G9
6.75″ 5/6 Lobes 8.2 Stages
6.75″ 7/8 Lobes 5.7 Stages
800 G9
8″ 7/8 Lobes 5.9 Stages