Specifications
| Flow Range | 150 – 350 gpm | 570 – 1,320 lpm |
| Revolutions per Volume | 0.810 rev/gal | 0.214 rev/l |
| Speed Range | 121 – 290 rpm | |
| Max. Differential Pressure | 1,800 psi | 12,410 kPa |
| Torque @ Max. Diff. Pressure | 5,720 lb-ft | 7,760 Nm |
| Stall Torque | 8,580 lb-ft | 11,630 Nm |
Predicted Build Rate – Degrees/100 ft (30 M)
Predicted Build Rate - Degrees/100 ft (30 M)
| Bend Setting | Slick Hole Size |
Single Stabilizer Hole Size |
||||
| 6″ | 6.25″ | 6.75″ | 6″ | 6.25″ | 6/75″ | |
| 152 mm | 159 mm | 171 mm | 152 mm | 159 mm | 171 mm | |
| 0.39 | 1.1 | 0.5 | – | 1.5 | 1.7 | 1.9 |
| 0.78 | 3.7 | 3 | 1.8 | 4.3 | 4.2 | 4 |
| 1.15 | 6.1 | 5.5 | 4.2 | 7.1 | 7 | 6.7 |
| 1.5 | 8.4 | 7.7 | 6.5 | 9.1 | 9.6 | 9.3 |
| 1.83 | 10.5 | 9.9 | 8.6 | 12.3 | 12.2 | 11.8 |
| 2.12 | 12.4 | 11.8 | 10.5 | 14.5 | 14.4 | 14 |
| 2.38 | 14.1 | 13.5 | 12.2 | 16.4 | 16.3 | 16 |
| 2.6 | 15.6 | 14.9 | 13.7 | 18.1 | 18 | 17.7 |
| 2.77 | 16.7 | 16 | 14.8 | 19.4 | 19.3 | 19 |
| 2.9 | 17.5 | 16.9 | 15.6 | 20.4 | 20.3 | 20 |
| 2.97 | 18 | 17.3 | 16.1 | 20.9 | 20.8 | 20.5 |
| 3.00 | 18.2 | 17.5 | 16.3 | 21.1 | 21 | 20.7 |
We Offer The Following Drilling Motors
MOTOR SIZES
500 G9
500 6/7 Lobes 8 Stages
5″ 7/8 Lobes 3.8 Stages
650 G9
6.5″ 5/6 Lobes 8.2 Stages
6.5″ 7/8 Lobes 5.7 Stages
675 G9
6.75″ 5/6 Lobes 8.2 Stages
6.75″ 7/8 Lobes 5.7 Stages
800 G9
8″ 7/8 Lobes 5.9 Stages